Electrical Specifications

Cyclic Operation Capability

• On/Off Cycle: 5 minutes ON / 30 minutes OFF

• Maximum Cycles: 20 per 24-hour period

• Duty Factor: 14.3% (optimized for rapid testing sequences)

Designed for high-frequency test environments requiring repeated ultra-high voltage applications.

ONAN Cooling System

Thermal Performance & Safety

• Temperature Rise: <100K during continuous operation

• Structural Integrity: Maintained at operational temperatures

• Fault-Tolerant Design: Non-damaging insulation failure during breakdown events

• Rapid Cooldown: 30-minute off-period reduces temperature by 70%

Cyclic Duty Applications

• High-volume transformer impulse testing

• Automated production line quality control

• Research facility stress testing sequences

• Lightning protection component validation

• UHV circuit breaker endurance testing

Operational Protocol

1. Pre-cycle insulation resistance test (min 100GΩ at 10kV DC)

2. Maximum 20 cycles per 24-hour period

3. Strict adherence to 30-minute cooldown periods

4. Monthly dissolved gas analysis (DGA) of oil

5. Annual dielectric strength verification at 1500kV

Robust Safety Features

• Pressure-relief diaphragm for overpressure events

• Triple-barrier insulation system

• Creepage distance: 35mm/kV (43.75m total)

• Corona-free design up to 1400kV

• Ground fault monitoring with automatic disconnect

Compliance Standards

• IEC 60273: High-voltage resistors

• IEEE 4-2013: HV testing techniques

• EN 60076-14: Liquid-immersed equipment

• IEC 61010-1: Safety requirements

• ASME BPVC Section VIII: Pressure vessel standards