Technical Specifications

Key Performance Advantages

• Precision Thermal Management: Specialized core design maintains ≤80K temperature rise at full continuous load

• Stable Resistance: ±0.5% tolerance under thermal stress (20°C to 120°C)

• Ultra-Low Inductance: <2μH design minimizes waveform distortion

• Corona-Free Operation: Silicone-coated terminals prevent partial discharge

Application Scenarios

High-Voltage Test Systems

• Impulse voltage generators (IEC 60060-1)

• Transformer testing circuits

• HV cable partial discharge detection

• Dielectric withstand test setups

Precision Measurement

• Voltage divider networks

• Oscilloscope probe matching

• High-frequency damping circuits

Installation Guidelines

1. Mount vertically with minimum 50cm clearance to grounded surfaces

2. Use only HV-rated silicone test leads (CAT IV minimum)

3. Ensure ambient temperature ≤40°C and humidity ≤85% RH

4. Verify ground connection resistance <1Ω before operation

Compliant with IEC 61010-1 safety standards for HV laboratory equipment.

Thermal Performance Data

Maintenance Protocol

• Pre-Use Check: Verify insulation resistance >100GΩ (2.5kV DC)

• Quarterly: Clean terminals with non-conductive solvent

• Annual: Calibration verification per IEC 60060-2

• Lifetime: Replace after 500 full-power cycles or 5 years