Technical Specifications

Design Features

• Low-Inductance Construction for transient response (di/dt > 10⁹ A/s)

• Stable TCR: <200 ppm/°C (-40°C to +85°C)

• Corona-Free terminal design with silicone corona rings

• Non-inductive Winding: Bifilar technique for RF applications

• Environmental Protection: IP54 rated enclosure standard

Application Scenarios

High Voltage Laboratories

Essential for impulse voltage generators and HV divider circuits where wavefront control is critical

Power System Testing

Used in switchgear PD testing and transformer resonant test systems

Industrial Processes

Voltage stabilization in HVDC transmission systems and X-ray generator circuits

Safety Compliance

• Dielectric strength tested to 450kV AC for 1min

• Short-circuit withstand: 25kA/0.5s (IEC 62271)

• Flame-retardant housing (UL94 V-0 rated)

• Electromagnetic compatibility per EN 61326-1

Installation Guidelines

1. Maintain minimum clearance of 1.5m to grounded surfaces

2. Mount vertically using M16 flange terminals (torque: 45Nm ±5%)

3. Ensure ambient temperature <40°C with adequate ventilation

4. Connect ground lug to low-impedance earth (<5Ω)

Maintenance Protocol