Technical Specifications

• Rated Voltage: 100kV AC RMS

• Nominal Capacitance: 500pF

• Dividing Ratio: 1000:1 (±1% accuracy)

• Frequency: 50/60Hz (40-400Hz range)

• Dielectric Loss: <0.5% @ 25°C

• Partial Discharge: <5pC at 100kV

• Cooling System: ONAN (Oil Natural Air Natural)

• Operating Duration:

• 60 minutes continuous @ 100% rated voltage

• Unlimited operation @ 80% rated voltage

• Dimensions: Base Ø150mm / Top Ø500mm × 1100mm height

• Weight: <20kg (lightest in class)

Portable Structural Design

Modular Oil-Immersed Architecture

• Removable Base: Enables field maintenance without depot return

• Corona Rings: Dual aluminum alloy rings prevent discharge

• LY Arm: Low-voltage interface with weatherproof connectors

• HV Arm: Precision capacitive stack with compact design

• Transport Optimized: 40% lighter than comparable 100kV dividers

Field Deployment Features

• Integrated Carrying Handles: Ergonomically positioned for two-person lift

• Quick-Assembly Design: Field-ready in <10 minutes

• VESA-Compatible Base: Mounts on standard tripods or test carts

Performance Validation

Compliance: Meets IEC 61869-11, IEEE C57.13, and ANSI/NETA MTS-2023 standards.

Field Applications

Mobile Substation Testing

• Circuit breaker timing tests

• Protective relay calibration

• Transformer turns ratio verification

Renewable Energy Sites

• Solar farm combiner monitoring

• Wind turbine step-up transformers

• Battery storage system validation

Industrial Maintenance

• Rotating machinery testing

• Cable fault location

• Ground grid integrity verification

Operational Advantages

• Ultra-Lightweight: <20kg enables transport without heavy equipment

• Rapid Deployment: Field-assembly in <10 minutes

• Maintenance Optimized: Removable base reduces service downtime by 60%

• Environmental Resilience: IP54 rating for field conditions

• Cost Efficient: 50% lower shipping costs than standard dividers

Field Deployment Protocol

Setup Procedure

1. Position on stable surface or tripod mount

2. Assemble corona rings and HV/LV arms

3. Establish dual-point grounding (≤0.1Ω resistance)

4. Connect special measuring lead-wire to test set

5. Perform safety verification at 20% rated voltage

Transportation Guidelines

• Maximum Tilt: 30° during transport

• Temperature Range: -20°C to +50°C

• Shock Protection: Use included foam inserts

Safety & Maintenance

Field Safety Procedures

1. Establish 2m safety perimeter per IEEE 516

2. Wear Class 4 arc-flash protection

3. Verify dielectric fluid level before operation

4. Implement step-test protocol (25%, 50%, 75%, 100%)

Maintenance Schedule