Technical Specifications

• Rated Voltage: 100kV AC RMS

• Nominal Capacitance: 15,000pF (15nF)

• Dividing Ratio: 1000:1 (±1% accuracy)

• Frequency: 50Hz (30-300Hz optional)

• Dielectric Loss: <0.4% @ 25°C

• Insulation Withstand: 110kV/1min (110% rated voltage)

• Cooling System: ONAN (Oil Natural Air Natural)

• Operating Duration: 60 minutes continuous @ 100% voltage

Industrial Structural Design

Robust Construction

• Aluminum Corona Rings: Lightweight alloy reduces shipping weight while preventing discharge

• Removable Pedestal: Heavy-duty base with quick-release maintenance access

• Scalable HV Connections: Corona-free terminals for flexible configurations

• Oil-Immersed Design: Mineral oil insulation for thermal stability

Measurement System

• Special Measuring Lead-Wire: Direct interface with variable frequency sources (30-300Hz)

• Dual-Stage Operation: Single-stage or series configurations

• HV Corona-Free Connection: Prevents measurement interference

Performance Validation

Compliance: Meets IEC 61869-11, IEEE C57.13, and ANSI/NETA MTS-2023 standards.

Industrial Applications

Power Transmission

• Substation busbar monitoring

• Transformer diagnostic testing

• Switchgear partial discharge analysis

Resonant Testing

• High-voltage cable testing

• Large capacitor bank validation

• GIS commissioning

Industrial Processes

• Electrolytic manufacturing

• High-power industrial lasers

• Semiconductor fabrication

Operational Advantages

• High-Capacity Performance: 15,000pF for energy-intensive applications

• Dual-Function Design: Voltage divider and coupling capacitor in one unit

• Thermal Management: ONAN cooling maintains stability

• Maintenance Optimized: Removable base enables field servicing

• Measurement Flexibility: Dual-stage configuration for versatile setups

Installation & Integration

Foundation Requirements

• Base Area: 0.35m² reinforced concrete

• Anchoring: Four M16 anchor bolts

• Clearance: 2.2m radial clearance

Electrical Connection Protocol

1. Establish dual 40mm² ground connections

2. Connect measuring lead-wire to variable frequency source

3. Configure for single-stage or dual-stage operation

4. Implement corona-free HV connections

5. Perform step-test (25%, 50%, 75%, 100%)

Safety & Maintenance

Critical Procedures

• Pre-Operation Check: Verify oil level and grounding

• Thermal Monitoring: Track temperature during operation

• Discharge Protocol: 8-minute discharge after operation

Maintenance Schedule