Core Technical Specifications

Performance Specifications

• Attenuation:

• 40kHz-100kHz: >40dB

• 100kHz-1MHz: >60dB

• Filter Reactor Q-Factor: >70 (Low signal distortion)

• Partial Discharge: <5pC (Industrial-grade noise control)

• Insertion Loss: <0.35dB at 50Hz

Dual-Circuit Design Advantages

• High-Current Isolation: 136A per circuit for heavy equipment

• Cross-Noise Rejection: -75dB inter-circuit interference suppression

• Load Balancing: Distribute 272A total capacity across equipment

• Maintenance Redundancy: Service one circuit while maintaining operation

Regulator-Integrated Engineering

• Space-Optimized: Direct mounting in standard 0.22kV regulator cabinets

• Robust Construction: 30kg industrial-grade chassis

• Thermal Management: Forced-air cooling channels

• High-Density Design: 1kVA/kg power density

Industrial Applications

• Industrial furnace control systems

• High-current PLC and DCS cabinets

• Substation control panel EMI protection

• Heavy machinery motor controllers

• Foundry equipment power conditioning

"Dual-circuit filters with 100A+ per channel capacity are essential for modern industrial facilities where high-power equipment generates complex EMI profiles requiring isolated suppression."

– IEEE Transactions on Industry Applications

Installation Guidelines

1. Mount vertically using M10 fasteners (45N·m torque)

2. Maintain 75mm clearance from heat sources

3. Use 50mm² minimum copper conductors

4. Implement isolated ground paths for each circuit

5. Verify phase sequencing before energization

Performance Validation Tests

Compliance & Standards

• IEC 61000-6-4 (Industrial emissions)

• IEC 61000-6-2 (Industrial immunity)

• EN 50178 (Electronic equipment for power systems)

• ANSI C62.41 (Surge protection)

Maintenance Protocol