On Site Impulse Voltage Test
HIVG 2400kV Mobile Impulse Voltage Test System
High-capacity mobile testing solution delivering 2400kV lightning impulses for field verification of power equipment insulation integrity, with engineered safety margins exceeding industry standards.
System Highlights
2400kV/240kJ Output
Meets highest voltage class equipment testing requirements
Vehicle-Mounted Design
Integrated transport solution for field deployment
Adjustable Waveform
1.2/50μs standard lightning impulse with programmable shaping
Technical Specifications
| Parameter | Specification |
|---|---|
| Maximum Voltage | 2400kV (±5%) |
| Energy Storage | 240kJ |
| Waveform Control | 1.2-10μs front time / 50-2000μs tail time |
| Peak Field Strength | ≤20.4kV/cm (no partial discharge) |
| Structural Safety Margin | 7.2x mechanical / 1.3x hydraulic |
| Maximum Deflection | 75mm at full load |
System Components
Core Modules
Multi-stage Capacitor Bank: Parallel-series conversion via ignition gaps
Wave Shaping Network: Adjustable head/tail resistors
DC Charging System: Polarity-switchable power supply
Control Console: Touchscreen waveform programming
Hydraulic Stabilization: 38.6kN cylinder support system
Testing Capabilities
Standard Lightning Impulse Tests
Full wave (1.2/50μs)
Chopped wave
Polarity reversal tests
Dielectric withstand verification
Programmable Waveforms
Front time: 1.2-10μs adjustable
Tail time: 50-2000μs adjustable
Voltage levels: 100kV-2400kV
Design Validation
Mechanical Analysis: 8.3MPa bending stress at full load
Field Simulation: 20.4kV/cm peak surface field strength
Type Tests: 10 verification protocols passed
Safety Factors: 7.2x structural / 1.3x hydraulic margins
Field Deployment Advantages
Mobility
Integrated vehicle mounting
Rapid setup (<2 hours)
Ruggedized transport design
Precision
±1% voltage measurement
Digital waveform recording
Automatic test sequences
Standards Compliance
IEC 60060-1 High-voltage test techniques
IEEE Std 4-2013 Standard Techniques
GB/T 16927.1-2011 Lightning impulse tests
Available for immediate deployment - contact our high-voltage testing team for site-specific configuration and scheduling.
