LQLVF 300kVA/2X500A Power Noise Filter: Premium EMI Suppression with 18kV Insulation

Exceptional Insulation Performance

Engineered for maximum electrical protection in demanding environments:

• 18kV/1min dielectric withstand capability

• Exceeds IEC 60664 insulation requirements by 300%

• Creepage distance: ≥35mm/kV

• Partial discharge inception voltage >10kV

• Corona-free design up to 1.5× rated voltage

Technical Specifications

High-Current Dual-Circuit Design

Robust engineering for industrial power applications:

• 1000A total current capacity (2×500A)

• Low-impedance copper busbar design (≤0.06mΩ)

• Copper windings with 200% short-circuit withstand

• Dynamic response time <5ms

• Parallel operation capability

Premium Attenuation Performance

Optimized EMI suppression for sensitive equipment:

• 40KHz-100KHz: >40dB attenuation

• 100KHz-1MHz: >60dB attenuation

• Multi-stage LC filtering topology

• Harmonic resonance damping technology

• Frequency-stable performance (±0.8% across load range)

Switchgear Integration Design

Optimized for substation cabinet installations:

• Heavy-duty 260kg construction for vibration resistance

• Standardized mounting points for retrofitting

• Front-access terminals with safety disconnects

• Thermal management for enclosed spaces

• HV cable entry points compatible with standard gland plates

Industrial Applications

Ideal for critical 0.6kV systems in:

• Industrial substation switchgear

• Utility power distribution systems

• High-reliability data center PDUs

• Renewable energy converter stations

• Industrial process control centers

• High-voltage test laboratories

Advanced Safety Systems

Engineered for maximum protection:

• Arc-resistant containment chambers

• Class H insulation system (180°C rating)

• Surge protection (30kV/20μs withstand)

• Ground fault monitoring with isolated relays

• Automatic discharge circuits

• IP55-rated enclosure for harsh environments

Installation & Maintenance Protocol

Ensure optimal performance in switchgear applications:

1. Verify cabinet dimensions ≥700×600×900mm (W×D×H)

2. Use silicone-insulated cable (20kV rating minimum)

3. Maintain minimum 150mm clearance to grounded surfaces

4. Torque HV terminals to 100 N·m ±3%

5. Perform quarterly partial discharge scans

6. Test insulation resistance annually (≥1000MΩ at 10kV DC)

7. Monitor attenuation performance every 24 months

Compliance & Standards

Exceeds international requirements including:

• IEC 62271-200 for AC metal-enclosed switchgear

• IEEE C57.12.00 liquid-immersed equipment

• EN 50522 earthing of power installations

• IEC 60076-16 power reactor standards

• ANSI/IEEE C57.12.90 test code

• IEC 61000-3-12 harmonic emissions

For switchgear integration guides or custom high-voltage solutions, contact our specialized engineering team. Performance validated per IEC 60270 partial discharge standards.